Makita Power Saw (110v only)
| Wet cutting hand held power saw from Makita (can be used dry with suitable blade)
Water fed to both sides of blade (via 5 M water feed tube, push on rubber tap/hose end fitting
As every day goes by, tiles seem to be getting even bigger this can be a big problem when it comes to wet cutting. The traditional machines become so heavy and expensive they are not viable. With the use of a straight edge clamped on the tile/slab accurate cuts can easily be achieved.
Accurate free hand cuts can also easily be achived
Highly suited to grout raking by reducing the depth of cut
- Electrical earth leakage breaker
- Blade Diameter: 125mm - Bore: 20 mm
- (we include ring to make standard 22.2mm blades fit)
- Depth of Cut @ 90°: 40mm
- Depth of Cut @ 45°: 26mm
- No Load Speed: 12,000rpm
- Input wattage: 860w
- Net Weight: 2.9kg
- 110v only (because of water)
- 5 M water feed tube, rubber tap fitting
Included continuous rim blade rated for concrete - suitable some stone, travertine and marble. However we recommend a suitable tile blade is purchased separately
(Sankyo blade fits better than Marcrist, as the Macrist's centre section is thick)
Price: £299.95 £352.44 Including VAT at 17.5%
|
