Wet cutting hand held power saw from Makita (can be used dry with suitable blade)

• Water fed to both sides of blade

As every day goes by, tiles seem to be getting even bigger this can be a big problem when it comes to wet cutting. The traditional machines become so heavy and expensive they are not viable. With the use of a straight edge clamped on the tile/slab accurate cuts can easily be achieved.

Accurate free hand cuts can also easily be achived

Highly suited to grout raking by reducing the depth of cut

• Electrical earth leakage breaker
• Blade Diameter: 125mm - Bore: 20 mm
• (we include ring to make standard 22.2mm blades fit)
• Depth of Cut @ 90°: 40mm
• Depth of Cut @ 45°: 26mm
• No Load Speed: 12,000rpm
• Input wattage: 860w
• Net Weight: 2.9kg
• 110v only (because of water)
• 5 M water feed tube, rubber tap fitting

Included - Continuous rim blade rated for concrete - suitable some stone, travertine and marble. However we recommend a suitable tile blade is purchased separately

• Cast alloy deck
• Unique water re-circulation system
• 180mm dia wheel inc (16mm bore, reversible flange alows 22.2mm bore blades)
• 25mm cut depth
• Height adjustable wheel guard
• Flip-up table plate for 15°, 30°, 45° mitres
• Hi-Torque 750 watt quiet induction motor
• Direct drive for smooth cuts
• Carry handle
• Cable winder
• Automatic overload reset button
• Table size: 50cm D x 55cm W
• Cutting guide - use left or right
• Fully adjustable sliding angle guide
• Click-grip calliper lock

weight 16 Kg inc packaging

110v ot 240v CHOOSE VOLTAGE BELOW

Although Rubi make some smaller flat bed saws, they are not very powerful. This is the best bet for the professional

• 40 mm depth of cut
• Stainless steel bed
• 0 - 45 deg mitre (can cut both sides of wheel)
• Sliding guide from 0 to 500 mm from wheel
• Blade guard and stem simply pull out for plunge cutting (to remove sections of the centre of a tile i.e. for sockets)
• Comes with reasonable quality diamond wheel
• Motor: 880w.....110 v or 240 v
• Wheel size - 200mm diameter 25.4mm bore
• Weight 15 Kg

The diamond wheel that is supplied with this machine is suitable for general ceramics. If you are cutting porcelain, granite marble and travertine etc then the Marcrist CK850 diamond wheel is highly recommended - See our 200mm diamond wheels section.

CHOOSE VOLTAGE BELOW

Genuine DeWALT- UK supplied stock (beware of imports) - 30 day 'no quibble' money back guarantee

• Stainless steel rail system is intergrated into the tile saw frame, ensuring super accurate cuts
• Relatively low weight allows one person to transport and set up saw
• Intergrated 45/22.5° feature for quick angle cuts
• Plunge feature allows the user to make quick plunge cuts
• Dual water nozzles can be adjusted on the blade in order to minimise over-spray and mist
• Rear and water trays can be placed on the tile saw to catch overspray - keeping the water in the pan
• Removeable cutting cart for easy cleaning of tile saw
• Repetitive cut guide with two positions - 90° & 45°
• Integrated portable residual current device (PRCD) circuit breaker for increased user protection
• Power Input: 1600 Watts (240v) - 1500 Watts (110v)
• Wheel Diameter: 250 mm Bore 25.4mm
• (Wheels as small as 150mm can be used but we recommend 180mm minimum)
• No Load Speed: 4200 rpm

Dimentions:

• Main tray 690mm wide x 890mm long
• Using back tray increases length by 400 mm
• Sliding cart 430 x 430mm
• Side extension table adds 230mm to right
• Using side drip tray increases overall width to 900mm
• Height adjustable to 3 levels
• Weight 32 kg

Cutting Capacity:

• Max cut length: 760mm (plunge and cut)
  (can be increased to over 1,000mm by plunging and turning tile)
• Max cut lenght: 660 mm (no plunge)
• Widest tile cut in half at 90° 660 mm
• Widest tile cut in half 45° 450 mm
• Max depth of cut: 95 mm
  (Motor pillar 150mm back and 330m to left of blade)

Includes:

• Extention side table
• Side and rear water collector
• 2 x hex key and blade spanner
• Support leg set
• 30 day 'no quibble' money back guarantee
• Free 12 months servicing contract
• 12 months guarantee
• 2 x Dewalt Premium porcelain blades Included

Truly industrial quality overhead double rail system.

• Quick height adjustment (much easier to align angled cuts between two marks on a tile)
• 45 degree bevel. (with micro adjustment for square)
• Max cutting length 710mm (850mm tile fits on bed)
• Cutting depth 50mm
• 230mm dia wheel 22.2 mm bore(not included)
• Water pump with flow control valve
• Excellent end stop system for repetitive cuts
• Removable leg set also included
• 1100w........110v or 240v
• Overall dimensions 1100 mm long x 550 mm wide x 1400 high
• weight 58Kg

CHOOSE VOLTAGE BELOW