Kelmore PrimeMore CS - 5 Litre

PrimeMore CS - A specialist primer for use on calcium sulphate/anhydrite screeds

• Penetrates and seals the screed’s surface creating an important barrier
• Eliminates any adverse reaction with cementitious adhesives and flooring compounds
• Improves the workability, adhesion, and strength of subsequently applied products
• To help achieve total and uniform coverage, pigmented  RED  for visibility during application
• Drying time: Approximately 60 minutes at 20 deg C
• Coverage per 5 litres: Approximately 32.5m2
• Area of use: Interior calcium sulphate/Anhydrite floor screeds
• Size: 5 litres
• DO NOT DILUTE

All laitance and surface contaminants must be completely removed. The screed must be confirmed adequately dry, no greater than *85% Relative Humidity (RH).

*When fitting resilient flooring, due to most adhesives and flooring being moisture sensitive, ensure the screed
is no greater than 75% RH before fitting the floor covering.