Buy 2 or more save 5%
@ £24.34 £29.21 each
Introducing a revolutionary treatment system that has been independently tested by a leading laboratory to confirm that Universeal Feel Safe effectively increases slip resistance of most hard surfaces including marble, terrazzo, ceramic, glazed tiles and enamel baths in both dry and wet conditions.Independent tests show that Universeal Feel Safe improves slip resistance on many surfaces when wet, (tests carried out to BS7976-2 : 2002)
- Surface - Increase in Slip Resistance (%)
- Glazed tiles 167% ( i.e. - 2.67 times safer)
- Black granite 64%
- Limestone 260%
- Terrazzo 253%
- Ceramic 20%
- Marble 75%
- Enamelled Bath 118%
- IMPORTANT - Always follow the instructions on the label carefully regarding suitability
Other suitable surfaces include porcelain, concrete and quarry tile. Not suitable for use on wood, plastic floors or painted surfaces.
Permanent Anti-slip Floor Treatment
For use on Ceramic, Porcelain & Natural Stone Floors & Showers
Universeal Feel Safe Anti-Slip Floor Treatment uses mild acid solutions to microscopically tread ceramics, porcelain and natural stone to greatly improve slip-resistance on wet floor areas.
NOT TO BE USED ON VINYL, LINOLEUM, WOOD, METAL OR COATED SURFACES.
- Use indoors and outdoors
- Improves slip resistance on wet floors
- Safe for stone surfaces
- Long-term slip-fall accident protection
Up to 5-10m2 per litre when used neat.
Directions for use:
Ensure that surfaces to be treated are clean and free from waxes, soap and dirt residues. Clean soiled or waxed surfaces first with Universeal Extreme Clean, rinse thoroughly and remove excess water. Protect all surfaces with masking material that are not to be treated.
First try the product in an inconspicuous area to determine suitability and action times. Apply Universeal Feel Safe evenly with the sprayer, brush or sponge (always wear protective gloves). There should always be a visible liquid film on the surface. During working time, repeatedly wipe and redistribute the product evenly with the sponge, add more product if necessary. Do not allow the product to dry, do not leave the product on the surface longer than necessary. Avoid product foaming or surface bubbling. Continuously check the slip resistance by moving the sponge across the surface. Stop treatment when the desired effect is achieved, action time approximately 3-10 mins depending on surface type. Extra care must be taken when applying Universeal Feel Safe to natural stone or polished tiles, polished tiles can lose there shine or become honed in appearance. It is very important to check action times, due to the variable results on different materials, if the liquid is left on the surface of the tile or stone for an extended time you may experience a significant change in colour and texture. No responsibility will be taken for misuse of this product by the manufacturer.
Rinse the Universeal Feel Safe solution from the applied area, clean the area thoroughly with clean water to neutralise the surface. After completion, test area by applying clean water to a small area and testing slip resistance with foot traffic.
Important, Please Note:
The undiluted product must not come in contact with sensitive surfaces (polished limestone, marble, lacquer, wood, carpets, metal trims etc.). Immediately wash off any splashes. The surface temperature should be between 10°C and 25°C during application. Switch off under floor heating. The surface is permanently altered, Universeal Feel Safe solution chemically reacts with the surface of ceramics, porcelain, enamel and silicate containing natural stones. Universeal Feel Safe permanent anti-slip opens micro cavities in the surface of the applied area increasing the slip resistance.